Dual Fluid Paths
Custom engineered and built hose reel with dual fluid paths for high pressure hydraulic applications. The reel can handle 100' of 1/4" ID twin hose. The spool and frame are constructed from heavy duty carbon steel with a blue powdercoat finish. The 12 volt D.C. motor is inboard mounted to reduce the width and overall size of the reel and for extra protection of the motor.
Three Fluid Paths - Hydraulic Oil
This custom engineered and built hose reel with three fluid paths is used for hydraulic oil. The reel can handle 30' of 2" ID hose. This custom hose reel incorporates a 4" inlet, three 2" goosenecks for outlets, a 12 volt D.C. explosion proof motor and a steel fluid path rated at 5000 PSI.
Four Fluid Paths - Hydraulic Oil
This custom engineered and built hose reel with four fluid paths is used for hydraulic oil. The reel can handle 30' of 1.5" ID hose. This custom hose reel incorporates a 3" inlet, three 1.5" goosenecks for outlets, a 12 volt D.C. explosion proof motor and a steel fluid path rated at 5000 PSI. Reel measures 47.75" in height, 46" deep and 33" wide.
Five Fluid Paths
Custom designed and built hydraulic rewind hose reel for 5 lines of hose; two lines of 1/4" I.D. and three lines of 3/8" I.D. The reel incorporates five 3/8" NPT female outlets and a five line swivel assembly with four 3/8" NPT female inlets and one 1/4" NPT female inlet. The hose capacity of the reel is 500' and the pressure rating is 3000 PSI. Contact the engineered products group for other options and capabilities.
6" Fluid Path
Custom built 115 VAC motor and gearbox driven hose reel for 50' of 6" diameter suction hose. Stainless steel fluid path and swivel with 6" 150# flanged inlet and 6" NPT female outlet. Reel is constructed from extra heavy duty stainless steel type 304 with a fully welded spool and frame. Contact the engineered products group for other fluid path sizes and options.
Eight Fluid Paths
Custom designed and built reel for eight 1" hydraulic lines that are all stored on one reel. This model is used for sub-sea work, primarily cutoff wheels and claws to cut ocean structures that have succumbed to the elements. The steel fluid path comes with eight 1" NPT female inlets and eight 1" NPT female outlets and is rated for 7000 PSI. The reel stands over 6.5 feet tall and includes fork lift tubes in the base to allow the reel to be easily moved.